Oat FLAKING MILL

Product Details Description:

The raw grains are conveyed by a magnetic device from the feed pipe to the vibrating feeder and then fed into the rotating drum through the dividing tee; in this way, the grains can pass vertically through the lower hole of the drum. The blade cage installed under the rotating frame cuts off the protruding ends of the grains when the rotating drum rotates. After passing through the blade cage, a roller full of top teeth ensures that the grains in the drum holes are cleaned out so as not to prevent the passage of other grains. This is done by inserting the top teeth on the wheel into the holes. The cut grains then fall into the collecting bucket outlet and are discharged from there.

Product parameter table: